Project Brief

2-to-12 Lane Honey Stick Pack & Barrier Sachet Machines (Up to 540 PPM)

Produce leak-free 5–20 g tubular honey sticks and 3-/4-side sachets at 80–540 packs/min using heated SUS316L/ceramic multi-lane pistons and cooled seal jaws.

High-Speed Portion Honey Sticks Without Compromised End Seals

Single-serve 7 g, 10 g, and 15 g honey sticks (and spoon/honey-pot die-cut sachets) command 3–5× higher retail margin per kilogram than bulk jars—provided zero packs burst inside display cartons! Inside honey stick and pouch machines and honey packaging lines, FT-280HY class multi-lane VFFS systems split wide rollstock (up to 650–850 mm) into 2, 4, 6, 8, 10, or 12 parallel lanes.

Independent servo or ceramic rotary-valve pumps meter each lane within ±0.5%–1.0% into 0.07–0.10 mm PET/AL/LLDPE or PET/VMPET/LLDPE barrier laminates at 35–45 cycles/min per lane (up to 540 sticks/min total).

Throughput comparison across 2-head jar fillers, 6–8 head bottle lines, 16-head bottling, and 12-lane stick packers
Select piston head count or stick-pack lane count around 85% nominal utilization to absorb batch tank switchovers.

Multi-Lane Honey Stick Pack Machine Configuration Tiers

Published specifications across 2-lane to 12-lane honey stick frames:

Model / Lane Tier Stick Width & Length Dose Range Rated Output Power & Footprint
2–4 Lane Compact Stick W 17–35 mm; L 50–180 mm 5 – 25 g 70–170 sticks/min 3.5–4.5 kW; 1,500 × 900 × 1,950 mm
6–8 Lane Mid-High VFFS W 17–35 mm; L 50–180 mm 5 – 20 g 210–340 sticks/min 5.5 kW; 2,000 × 1,050 × 2,100 mm
10–12 Lane FT-280HY W 17–30 mm; L 60–160 mm 5 – 15 g 380–540 sticks/min 6.5–7.5 kW; 2,200 × 1,200 × 2,150 mm
Inline Cartoner Link (FTZH-130) Collates 5–50 sticks/box Auto count & tuck/glue Up to 130 cartons/min Synchronized transfer conveyor

Need rigid straws or larger 250–1,000 g spout pouches? See spout pouch and bulk honey fillers.

Four-stage anti-drip and anti-bubble honey nozzle actuation sequence
Eliminating a single sticky honey thread on jar finish rims prevents cap cross-threading, leaky seals, and sticky conveyor chains.

Honey Packaging Engineering Notes

  • Thermally Isolated Filling Tubes: Double-walled air/water-cooledforming tubes prevent radiant cross-jaw heat from warming nozzles and thinning honey into drips during short stops.
  • Metallocene LLDPE Sealant Layer: Specify a 40–50 μm mLLDPE inner sealant skin on your PET/AL laminate for high hot-tack strength and seal-through resilience.
  • Vacuum Leak-Bath QC: Submerge sample sticks from all 12 lanes at -0.07 MPa water vacuum every 30 minutes to verify 100% cabin-pressure burst integrity.

Size Your Lane Count & Cartoner

Share stick gram weight, width × length, and sticks per retail box via Project Brief.

Six-station turnkey honey jar and squeeze-bottle packaging line topology
Gentle <=40–42 °C water-jacket conditioning lowers viscosity without degrading diastase activity or spiking HMF.

Explore related systems in Honey Packaging Lines, Viscosity & Anti-Drip Specs, or send your jar/stick specs via Project Brief.

Related Specifications

Further Reference

Request Project Configuration Review

Share layout constraints, architectural drawings, or throughput targets with Honey Packaging Line Technical Group.

Configure My Honey Line