Project Brief

Automatic Honey Glass Jar & PET Squeeze-Bottle Packaging Lines

Configure 2-to-16 head servo piston honey bottling lines with -0.08 MPa vacuum lug cappers, PET flip-top induction sealers, and hex/wrap-around labelers.

Rigid Glass Jars vs Inverted No-Mess PET Squeeze Bottles

Retail honey shelves are dominated by two rigid formats—classic glass round/hexagonal jars sealed with metal twist-off lug lids, and inverted PET/HDPE squeeze bottles fitted with silicone cross-slit valves and induction foil liners. Within honey packaging lines, one servo piston filler platform can run both formats when paired with dual-mode capping and multi-facet labeling stations.

Explore glass jar vacuum sealing in glass honey jar vacuum capping lines and inverted squeeze setups in honey squeeze bottle filling lines.

Six-station turnkey honey jar and squeeze-bottle packaging line topology
Gentle <=40–42 °C water-jacket conditioning lowers viscosity without degrading diastase activity or spiking HMF.

Inline Servo Piston Honey Bottling Head-Count Scaling

Published 500 ml baseline speeds across VK/FA/BG servo piston frames (0.6 MPa air, 220V/380V):

Piston Head Count 500 ml Honey Jar Speed Fill Cylinder Options Matched Downstream Capper
2-Head Servo Inline 14–20 jars/min 50–500 ml or 100–1,000 ml Single-head chuck or semi-auto vacuum capper
4–6 Head Servo Inline 24–42 jars/min 100–1,000 ml / up to 5,000 ml Automatic JVC-40 vacuum lug or 4-wheel spindle
8–10 Head Servo Inline 48–60 jars/min 100–1,000 ml High-speed rotary chuck / inline spindle + induction
12–16 Head Dual-Lane / Servo 65–80+ jars/min 100–1,000 ml Rotary multi-head capper + dual-head labeler

Packing single-serve tea sticks or stand-up pouches? See honey stick and pouch machines.

Throughput comparison across 2-head jar fillers, 6–8 head bottle lines, 16-head bottling, and 12-lane stick packers
Select piston head count or stick-pack lane count around 85% nominal utilization to absorb batch tank switchovers.

Honey Packaging Engineering Notes

  • Independent Per-Head HMI Trim: Fine-tune individual cylinder stroke offsets by 0.1 g right from the touchscreen without touching wrenches.
  • Drip Collection Tray Interlock: Pneumatic catch-trays slide automatically beneath nozzles during container indexing just in case warm thin batches weep.
  • Hexagonal & Bear Bottle Orientation: Side-belt alignment guides register six-sided hex jars and sculpted honey-bear bottles cleanly before front/back/neck-tamper label application.

Size Your Bottling Line Footprint

Calculate required head count in our honey line BPM and piston calculator or start a Project Brief.

Four-stage anti-drip and anti-bubble honey nozzle actuation sequence
Eliminating a single sticky honey thread on jar finish rims prevents cap cross-threading, leaky seals, and sticky conveyor chains.

Explore related systems in Honey Packaging Lines, Viscosity & Anti-Drip Specs, or send your jar/stick specs via Project Brief.

In This Section

Related Specifications

Further Reference

Request Project Configuration Review

Share layout constraints, architectural drawings, or throughput targets with Honey Packaging Line Technical Group.

Configure My Honey Line